Sennheiser MKH 416-P48U3 Moisture-Resistant Shotgun Microphone
With the Sennheiser MKH 416-P48U3 moisture-resistant shotgun microphone, you can catch excellent audio in challenging circumstances for your upcoming professional film, TV, or location recording. Its strong output, minimal noise, and sharp directivity offer mix-ready sound quality. Additionally, the MKH 416-P48U3 provides the dependability required for high-pressure performances; there are no controls to be concerned about.
The microphone attenuates 125 Hz to 2 kHz by about 10 dB at the 90° off-axis spots thanks to its hypercardioid polar pattern in the low to midrange and lobar pattern in the high frequencies. The wide frequency response, improved consonant articulation, and high SPL handling of the MKH 416-P48U3 enable you to record dialogue, foley, and sound effects with complete dynamics and clarity.
Performs in challenging environmental circumstances
You will undoubtedly come into contact with dampness and condensation while working outdoors, which can lead to many microphones failing. With its highly resistant to moisture RF condenser design, the MKH 416-P48U3 allows you to dependably record high-quality audio in both favorable and unfavorable environmental circumstances.
High-Quality Music Production
The skilled expert was considered when designing the MKH 416-P48U3. Its 40 Hz to 20 kHz frequency response includes a natural bass roll-off to reduce rumble and a gentle rise from 5 to 15 kHz to improve intelligibility. Studio-quality signal clarity is possible thanks to its low self-noise of 13 dBA and high sensitivity of -32 dB, which eliminates the need for noise reduction and gain boosting in post-production.
Driven by a Phantom
The transformerless, completely floating balanced output of the MKH 416-P48U3 ensures the highest level of signal integrity. The MKH 416-P48U3 is suitable with a range of handheld audio recorders, field recorders, mixer adapters, as well as built-in preamps on many camcorders and cinema cameras due to its 3-pin XLR output and compliance with 44 to 52 VDC phantom power.
Ideal for mounting boompoles
The metal frame of the MKH 416-P48U3 has a matte black finish to minimize distracting visual reflections. Using the provided MZQ 100 clip, mount the MKH 416-P48U3 immediately on a stand or boompole. Alternatively, to stop vibrations from reaching the microphone, install the MKH 416-P48U3 in the Sennheiser MZS 20-1 combination shockmount, pistol grip, and stand adapter, which is sold separately.
Reduces Wind Disturbance with a Windscreen
A foam windscreen is included with the MKH 416-P48U3 to lessen obtrusive wind sounds from breezes, fans, heaters, and air conditioners. Consider the Sennheiser MZH 60-1 furry windshield for the best reduction of wind noise in interior or outdoor settings (available separately).
Specification
Microphone
Form Factor : Stand/Boom Mount
Sound Field : Mono
Operating Principle : Line Gradient
Capsule : Condenser
Polar Pattern : Lobar, Supercardioid
Orientation : End Address
Circuitry : Solid-State
Pad : None
High-Pass Filter : None
Tone Adjustment : None
Gain Adjustment : None
Indicators : None
On-Board Controls : None
Windscreen : Foam (Included)
Performance
Frequency Range : 40 Hz to 20 kHz
Maximum SPL : 130 dB SPL
Off-Axis Rejection : 3 dB at 60°, 20 dB at 120°, 15 dB at 180°
Impedance : 25 Ohms
Load Impedance : 800 Ohms
Sensitivity : -32 dBV/Pa at 1 kHz
Equivalent Noise Level : 13 dB A-Weighted, 24 dB CCIR
Connectivity
Output Connectors (Analog) : 1 x XLR 3-Pin
Power
Operating Voltage : 48 V ± 4 V
Operating Current Consumption : 2 mA
Physical
Color : Black
Mounting : Shockmount (Included)
Included Case : Soft Case
Construction Material : Metal
Storage Temperature : 14 to 102°F / -10 to 70°C
Dimensions : ø: 0.75 x L: 9.84" / ø: 19 x L: 249.94 mm
Weight : 6.17 oz / 175 g (Microphone)
